Act quickly with Emergency Plumber Putney if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.
Do not put cooking oils, fat, or grease, down your drain. These fats cause clogs by solidifying in pipes. To properly dispose of fats, put them in a bowl with a lid that you can dispose of. Once it gets hard, throw it in the trash or compost bin.
Group all of your plumbing repairs before scheduling a plumber to come out. Check all of your fixtures and faucets. If anything is dripping, running or clogged, make a list for the plumber. That way, when the plumber comes, they can do all of the jobs in one visit. This will cut down on charges.
Do not let your faucet leak. Did you know a leaky faucet can waste about 150 gallons of water every day? If you have a leak, never ignore it. It could be coming from the faucet or the pipes. Continually check pipes and faucets for extra moisture or small leaks.
Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.
Check your gas water heater periodically to make sure the pilot flame is lit. The correct color for this flame should be blue. The tip of the flame should be yellow. If you find that you are only seeing a yellow flame, you may need to call a professional for safety reasons.
Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.
Is your toilet leaking? Find out by putting some food color in the tank and then check the bowl later. If there is colored water in the bowl, the toilet has an internal leak. To fix an internal leak you can simply replace the tank’s ball or flapper.
Sometimes you have no choice in what plumber you have scheduled, but you can still research them online. Check out your plumber’s website and read all of the reviews that are available.
In any DIY plumbing project, make sure that you always test the drains and the supply lines before you close up the walls. It is a lot easier to find and solve problems if you look for them while you are still in the process of actively doing the job.
Work with plumbers that offer flat rates. When a plumber is charging by the hour, they do not have an incentive to get the job done quickly. It is human nature to go just a little bit slower if it’ll mean extra money in our pockets. If you cannot find someone who charges per project make sure that you are vigilant in watching the clock and their work.
Teach kids how to shut off the toilet’s water supply. Kids are notorious for putting large wads of toilet paper and other things into the toilet, which inevitably leads to the toilet overflowing. Especially if your bathroom has carpet, show kids how to turn the water valve off if the toilet water keeps rising, to prevent the mess of an overflow.
When searching for a good plumber you should always check references. It is easy to just go with the lowest price, but you have to do your research and make sure the plumber has a good reputation with the people they have done work for in the past so you do not get a bad plumber.
When you are going to do laundry in your home washing machine, do not use excess detergent, bleach or other chemicals. Too many of these products can cause the natural bacteria in your septic system to be killed. Just use enough of these products in order to get your laundry done.
If you think you understand what is wrong with your toilet, but aren’t sure, you should first do some more research on the internet. Most plumbing problems are fairly standard, and you should be able to read about the problem in great detail on several amateur plumber forums to make sure you understand the problem.
Look at your hot water heater and make sure that the temperature is not higher than 120 degrees Fahrenheit. If it is, it could cause you to get burned or it could reduce the unit’s energy consumption. If you determine that the temperature is too high, adjust immediately to avoid any of these things from happening.
When it comes to plumbing a great choice is to invest in brass fittings. Sure, they may be more expensive upfront, however their longevity is amazing compared to the alternatives, so you end up saving money. As an added bonus, the brass fittings look so much better than the other alternatives.
In conclusion, it is important to know what to watch out for so that you do not find yourself underwater when it comes to plumbing issues. Use the great advice provided to you in this article and you will be glad that you took the extra few minutes to further your knowledge.